The RichmondA(R) EssentialA(R) RMTEX-06 is a 6.5 kW tankless electric water heater ideal for point-of-use applications. This unit is ideal for a sink and hard wired to utilize 240 V. RichmondA(R) EssentialA(R) tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.

The Richmond® Essentail RMTEX-18 is an 18 kW tankless electric water heater ideal for mid-range whole home applications. This unit is ideal for single shower applications in the midwest. Richmond® Essential® tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature. Richmond® 's self modulating technology can save Up to 50% on your water heating bill.

The Richmond Essential™ RMTEX-27 is a 27 kW tankless electric water heater ideal for whole home applications. This unit is great for an application that requires the shower and multiple fixtures to run simultaneously. Richmond Essential™ tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money, and require no venting. The sleek, compact size, 90 percent smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature. Richmond's self modulating technology can save Up to 50 percent on your water heating bill. Features Save on water heating costs No standby heat loss, activates only when hot water is needed Instant, continuous hot water 99.8% energy efficient Reduces calcification and sedimentation Digital temperature display used to control temperature can adjust in increments of 1°F 112A Requires (3) 40A double pole breakers and 240V Requires #8 AWG wire size Recommended minimum household electrical service 200 amps

Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.

WATER HEATER CONN 3/4X3/4X12

The T100 Series mechanical time switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 a per pole and allow for up to 12 On/Off operations per day. A manual override switch provides added convenience.

Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.

BrassCraft Copper-Flex? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.

Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.

Fits standard 1/2 in socket drive to replace screw-in water heater elements.

The CAMCO Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat.

UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.

CONNECTOR WATER HEAT GAS KIT
The Copper Connector Kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll of Teflon tape, two 3/4 in NPT compression adapters and one 1/2 in x 24 in stainless steel gas connector. Tools for installation not included

UL listed. Gasket included.

UL listed. Gasket included.